This site will look much better in a browser that supports web standards, but it is accessible to any browser or Internet device.

WorkSafeBC

banner image

Standards referenced in the OHS Regulation

The Table of Standards lists Standards cited in the OHS Regulation. WorkSafeBC publishes this Table for the convenience of users in accordance with its mandate under the Workers Compensation Act to provide information and to promote public awareness. While every effort has been made to ensure the Table is correct, WorkSafeBC does not warrant the accuracy or completeness of this Table. Users should rely on the official version of the OHS Regulation as the primary source for references to standards.

Links are provided for convenience only and may not be to the same version as cited in the OHS Regulation. When the OHS Regulation references a specific edition of a standard that edition must be followed unless there is a Guideline accepting another edition as a standard acceptable to the Board under Section 4.4(2)(a) of the OHS Regulation.

Standards referenced in the OHS Regulation
 
Regulation Section/subsection Referenced Standard CSA View Access Note
4.1.1 (1)CAA 2002 Guidelines for Snow Avalanche Risk Determination and Mapping in Canada and the Land Managers Guide to Snow Avalanche Hazards in Canada  
4.68 (1)IES 1993 Lighting Handbook -- Reference and Application  
4.69 (3) BC Building Code  
4.69 (4) BC Building Code  
4.69 (4) BC Fire Code  
4.72 (1)(b)ASHRAE 62-1989 Ventilation for Acceptable Indoor Air Quality  
4.72 (2)ASHRAE 62-1989 Ventilation for Acceptable Indoor Air Quality  
4.82 (2)(d)ASHRAE 62-1989 Ventilation for Acceptable Indoor Air Quality  
5.1 (a)ACGIH 2002 Threshold Limit Values and Biological Exposure Indices As amended
5.1 (b)ACGIH Documentation of Threshold Limit Values and Biological Exposure Indices As amended
5.1 BC Fire Code  
5.1 IARC Monographs on the Evaluation of Carcinogenic Risks to Humans  
5.71 (2)CSA C22.1-1994 Canadian Electrical Code, Part IYes 
7.1 (2)(a)CSA Z107.56-1994 Procedures for the Measurement of Occupational Noise ExposureYes 
7.1 (2)(b)ANSI S1.25-1991 Specification for Personal Noise Dosimeters  
7.3 (2)(a)CSA Z107.56-1994 Procedures for the Measurement of Occupational Noise ExposureYes 
7.3 (3)ANSI S1.25-1991 Specification for Personal Noise Dosimeters  
7.7 (1)(c)CSA Z94.2-2002 Hearing Protection Devices - Performance, Selection, Care, and UseYes 
7.11 (b)ISO 2631-1:1997 Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole Body Vibration  Also an ANSI standard
7.12 (a)ISO 5349-1:2001 Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-transmitted Vibration - Part 1: General Requirements  
7.12 (a)ISO 5349-2:2001 Mechanical Vibration - Measurement and Evaluation of Human Exposure to Hand-transmitted Vibration - Part 2: Practical Guidance for Measurement at the Workplace As amended
7.12 (b)ISO 2631-1:1997 Mechanical Vibration and Shock - Evaluation of Human Exposure to Whole Body Vibration  As amended, also an ANSI standard
7.19 (4)(a)(i)HC Safety Code 25-1983 Short-Wave Diathermy Guidelines for Limiting Radiofrequency Exposure As amended
7.19 (4)(a)(ii)HC Safety Code 26-1987 Guidelines on Exposure to Electromagnetic Fields from Magnetic Resonance Clinical Systems As amended
7.19 (4)(a)(ii)HC Safety Code 6-1999 of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz As amended
7.19 (4)(b)(i)ANSI Z136.1-2000 Safe Use of Lasers As amended
7.19 (4)(b)(ii)ANSI Z136.2-1997 Safe Use of Optical Fiber Communication Systems Utilizing Laser Diode and LED Sources As amended
7.19 (4)(b)(iii)ANSI Z136.3-1996 Safe Use of Lasers in Health Care Facilities As amended
7.19 (4)(b)(iv)CSA Z386-2001 Laser Safety in Health Care FacilitiesYesAs amended
7.19 (5)ACGIH 2002 Threshold Limit Values and Biological Exposure Indices As amended
7.23 (a)(i)HC Safety Code 20A-1980 X-Ray Equipment in Medical Diagnosis Part A: Recommended Safety Procedures for Installation and Use As amended
7.23 (a)(ii)HC Safety Code 27-1987 Requirements for Industrial X-Ray Equipment Use and Installation As amended
7.23 (a)(iii)HC Safety Code 28-1991 Radiation Protection in Veterinary Medicine - Recommended Safety Procedures for Installation and Use of Veterinary X-Ray Equipment As amended
7.23 (a)(iv)HC Safety Code 29-1993 Requirements for the Safe Use of Baggage X-Ray Inspection Systems As amended
7.23 (a)(v)HC Safety Code 30-1999 Radiation Protection in Dentistry -- Recommended Safety Procedures for the Use of Dental X-Ray Equipment As amended
7.23 (a)(vi)HC Safety Code 31-1994 Radiation Protection in Computed Tomography Installation As amended
7.23 (a)(vii)HC Safety Code 32-1994 Safety Requirements and Guidance for Analytical X-Ray Equipment As amended
7.23 (a)(viii)HC Safety Code 33-1995 Radiation Protection in Mammography As amended
7.23 (b)(i)HC Safety Code 25-1983 Guidelines for Limiting Radiofrequency Exposure -- Short-Wave Diathermy As amended
7.23 (b)(ii)HC Safety Code 26-1987 Guidelines on Exposure to Electromagnetic Fields from Magnetic Resonance Clinical Systems As amended
7.23 (b)(iii)HC Safety Code 6-1999 Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz Only 1999 version, not amended versions
7.23 (c)(i)ANSI Z136.1-2000 Safe Use of Lasers As amended
7.23 (c)(ii)ANSI Z136.2-1997 Safe Use of Optical Fiber Communication Systems Utilizing Laser Diode and LED Sources As amended
7.23 (c)(iii)ANSI Z136.3-1996 Safe Use of Lasers in Health Care Facilities As amended
7.23 (c)(iv)CSA Z386-2001 Laser Safety in Health Care FacilitiesYesAs amended
7.23 (d)(i)CAN/CSA C22.2 No. 224-1989 Radiant Heaters and Infrared and Ultraviolet Lamp Assemblies for Cosmetic or Hygienic Purposes in Nonmedical ApplicationsYesAs amended
7.23 (e)(i)HC 2001 Guidelines for the Safe Use of Diagnostic Ultrasound As amended
7.23 (e)(ii)HC Safety Code 24-1991 Guidelines for the Safe Use of Ultrasound: Part II -- Industrial and Commercial Applications As amended
7.26 ACGIH 2003 Threshold Limit Values and Biological Exposure Indices As amended
8.11 (2)(a)CAN/CSA Z94.1-1992 Industrial Protective HeadwearYes 
8.11 (2)(b)ANSI Z89.1-1986 Protective Headwear for Industrial Workers Requirements  
8.11 (2)(c)JIS T8131-1990 Industrial Safety Helmets  
8.12 (1)(a)CSA D230-1985 Protective Headgear in Motor Vehicle ApplicationsYes 
8.12 (1)(b)BSI BS 5361-1976 Specification: Protective Helmets for Vehicle Users With 1981 amendments
8.12 (1)(c)Snell 1995 Standard for Protective Headgear for Use with Motorcycles and Other Motorized Vehicles  
8.12 (1)(d)US CFR Title 49 - Part 571.218 US Federal Standard for Motorcycle Helmets Undated
8.13 (1)(a)CSA D113.2-1989 Cycling HelmetsYes 
8.13 (1)(b)Snell 1994 Standard for Protective Headgear for Use in Non-Motorized Sports  
8.13 (1)(c)Snell 1995 Standard for Protective Headgear for Use in Bicycling  
8.15 (1)CAN/CSA Z94.3-1992 Industrial Eye and Face ProtectorsYes 
8.15 (3)ANSI Z87.1-1989 Practice for Occupational and Educational Eye and Face Protection  
8.17 (2)(a)CAN/CSA Z94.3-1992 Industrial Eye and Face ProtectorsYes 
8.17 (2)(b)ANSI Z87.1-1989 Practice for Occupational and Educational Eye and Face Protection  
8.21 (2)(b)(ii)ASTM F1414-2004 Standard Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing  
8.21 (2)(b)(iii)ISO 11393-2 Protective clothing for users of hand-held chain-saws - Part 2: Test methods and performance requirements for leg protectors Undated
8.21 (2)(b)(iv)BS EN 381-5:1995 Protective clothing for users of hand-held chain saws - Part 5: Requirements for leg protectors  
8.22 (3)(a)CAN/CSA Z195-1992 Protective FootwearYes 
8.22 (3)(b)ANSI Z41-1991 Protective Footwear  
8.22 (3)(d)BS EN 346:1993 Specification for Safety Footwear for Professional Use  
8.24 (2)WCB PPE 2 High Visibility Garment - Personal Protective Equipment Standard 2 Undated
8.24 (3)WCB PPE 2 High Visibility Garment - Personal Protective Equipment Standard 2 Undated
8.27 (a)CAN/CGSB 65.7-1988 Lifejackets, Inherently Buoyant Type  
8.27 (b)CAN/CGSB 65.11-1988 Personal Flotation Devices  
8.27 (c)CGSB 65-GP-14M-1978 Lifejackets, Inherently Buoyant, Standard Type Undated
8.27 (d)BS EN 396:1994 Lifejackets and Personal Buoyancy Aids - Lifejacket 150 N  
8.33 (1)CAN/CSA Z94.4-1993 Selection, Use, and Care of RespiratorsYes 
8.37 (1)CAN/CSA Z180.1-2000 Compressed Breathing Air and SystemsYes 
8.37 (2)CAN/CSA Z180.1-2000 Compressed Breathing Air and SystemsYes 
8.40 (2)CAN/CSA Z94.4-2002 Selection, Use, and Care of RespiratorsYes 
8.41 (1)CAN/CSA Z94.4-2002 Selection, Use, and Care of RespiratorsYes 
8.44 (c)CAN/CSA Z94.4-2002 Selection, Use, and Care of RespiratorsYes 
8.45 (1)CAN/CSA Z94.4-2002 Selection, Use, and Care of RespiratorsYes 
8.45 (3)CAN/CSA B339-1996 Cylinders, Spheres, and Tubes for the Transportation of Dangerous GoodsYes 
9.20 (1)(a)ANSI/API 590-1985 Steel Line Blanks  
9.20 (1)(b)ANSI/ASME B16.5-1988 Pipe Flanges and Flanged Fittings  
9.20 (1)(c)ANSI/ASME B31.1-1992 Power Piping  
9.20 (1)(d)ANSI/ASME B31.3-1993 Chemical Plant and Petroleum Refinery Piping  
9.50 (2)CSA C22.1-1994 Canadian Electrical CodeYes 
12.3CSA Z432-1994 Safeguarding of MachineryYes 
12.13 CSA Standard CAN/CSA-Z321-96 Signs and Symbols for the WorkplaceYes 
12.22 ANSI/ASME B20.1-1993 Safety Standards for Conveyors and Related Equipment  
12.24 (3)CSA Z432-1994 Safeguarding of MachineryYes 
12.29 (a)CAN/CSA Z142-1990 Code for Punch Press and Brake Press Operation: Health, Safety, and Guarding RequirementsYes 
12.29 (b)ANSI B11.4-1993 American National Standard for Machine Tools -- Shears -- Safety Requirements for Construction, Care, and Use  
12.29 (c)ANSI B11.5-1988 American National Standard for Machine Tools -- Ironworkers -- Safety Requirements for Construction, Care, and Use.  
12.44 ANSI B7.1-1988 The Use, Care and Protection of Abrasive Wheels  
12.51 ANSI A10.3-1995 American National Standard for Construction and Demolition Operations -- Safety Requirements for Powder-Actuated Fastening Systems  
12.72 (1)CSA Z62.1-1995 Chain SawsYes 
12.74 (1)ANSI/ALI ALCTV-1998 American National Standard for Automotive Lifts -- Safety Requirements for Construction, Testing and Validation  
12.74 (2)ANSI/ALI ALOIM-2000 American National Standard for Automotive Lifts -- Safety Requirements for Operation, Inspection and Maintenance  
12.74 (3)ANSI/ASME PALD-2003 Safety Standard for Portable Automotive Lifting Devices  
12.83 (a)CAN/CSA Z434-1994 Industrial Robots and Robot Systems -- General Safety RequirementsYes 
12.83 (b)ANSI/RIA R15.06-1992 American National Standard Industrial Robots and Robot Systems - Safety Requirements  
12.112 CSA W117.2-1994 Safety in Welding, Cutting, and Allied ProcessesNo 
13.2 (2)(a)WCB WPL 1-2004 Design, Construction and Use of Wood Frame Scaffolds  
13.2 (2)(b)WCB WPL 2-2004 Design, Construction and Use of Crane Supported Work Platforms  
13.2 (2)(c)WCB WPL 3-2004 Safety Factor and Minimum Breaking Strength for Suspended Work Platforms and Associated Components  
13.2 (2)(d)WCB LDR 1-2004 Job Built Ladders  
13.16 NLGA Standard Grading Rules for Canadian Lumber  
13.23 (2)CAN/CSA C225 Vehicle-Mounted Aerial DevicesYesUndated
13.30 (2)WorkSafeBC 13.30 Work Platforms Supported by Lift Trucks  
13.32 CAN/CSA Z271-1998 Safety Code for Suspended Elevating PlatformsNoCSA View Access for other provinces has this edition
13.32 CAN/CSA Z91-2002 Health and Safety Code for Suspended Equipment OperationsYes 
14.2 (10)ANSI/ASME B30.7-2001 Base Mounted Drum Hoists  
14.2 (11)ANSI/ASME B30.6-2003 Derricks  
14.2 (12)ANSI/ASME B30.14-2004 Side Boom Tractors  
14.2 (13)ANSI/ASME B30.21-2005 Manually Lever Operated Hoists  
14.2 (14)CAN/CSA Z10535-2003 Hoists for the Transfer of Disabled Persons-Requirements and Test MethodsYes 
14.2 (2)CSA C22.1-1994 Canadian Electrical CodeYesRegulation text includes "Part 1, Section 40"
14.2 (2)CSA C22.2 No. 33-1984 Construction and Test of Electric Cranes and HoistsYes 
14.2 (3)(a)ANSI MH27.1-2003 Specifications for Patented Track Underhung Cranes and Monorail Systems  
14.2 (3)(b)CMAA 70-2004 Specifications for Top Running Bridge & Gantry Type Multiple Girder Electric Overhead Traveling Cranes  
14.2 (3)(c)CMAA 74-2004 Specifications for Top Running and Under Running Single Girder Electric Overhead Cranes Utilizing Under Running Trolley Hoist  
14.2 (4)(a)CSA B167-1996 Safety Standard for Maintenance and Inspection of Overhead Cranes, Gantry Cranes, Monorails, Hoists, and TrolleysYes 
14.2 (4)(b)ANSI/ASME B30.2-2005 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)  
14.2 (4)(c)ANSI/ASME B30.11-2004 Monorails and Underhung Cranes  
14.2 (4)(d)ANSI/ASME B30.16-2003 Overhead Hoists (Underhung)  
14.2 (4)(e)ANSI/ASME B30.17-2003 Overhead and Gantry Cranes (Top Running Bridge, Single Girder, Underhung Hoist)  
14.2 (5)(a)CSA Z150-1998 Safety Code for Mobile CranesYes 
14.2 (5)(b)ANSI/ASME B30.5-2004 Mobile and Locomotive Cranes  
14.2 (5)(c)ANSI/ASME B30.22-2005 Articulating Boom Cranes  
14.2 (6)CSA Z248-2004 Code for Tower CranesYes 
14.2 (7)ANSI/ASME B30.4-2003 Portal, Tower, and Pillar Cranes  
14.2 (8)CAN/CSA Z256-1987 Safety Code for Material HoistsYes 
14.2 (9) 2 (2)ANSI/ASSE A10.22-2007 Safety Requirements for Rope-Guided and Non-Guided Workers' Hoists  
14.30 (1)ANSI/SAE Z26.1-1990 American National Standard for Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways -- Safety Code  
14.64 (2)ANSI/SAE J376-1985 Load Indicating Devices in Lifting Crane Service  
14.96 (1)(b)(iii)CAN/CSA Z256-1987 Safety Code for Material HoistsYes 
14.116 (1)(b)(iii) 2 (2)ANSI/ASSE A10.22-2007 Safety Requirements for Rope-Guided and Non-Guided Workers' Hoists  
14.116 2 (2)ANSI/ASSE A10.22-2007 Safety Requirements for Rope-Guided and Non-Guided Workers' Hoists  
15.30 ASME B30.9-2006 Slings  
15.57 ASME B30.20-1993 Below-the-Hook Lifting Devices  
16.7 (a)ANSI/ASME B30.22-1993 Articulating Boom Cranes  
16.7 (b)ANSI/SVIA 1-1990 Four Wheel All-Terrain Vehicles - Equipment, Configuration, and Performance Requirements  
16.7 (c)ANSI/ASME B30.5-1994 Mobile and Locomotive Cranes  
16.7 (c)CSA Z150-1998 Safety Code for Mobile CranesYes 
16.7 (d)ANSI/ASME B56.1-1993 Safety Standard for Low Lift and High Lift Trucks  
16.7 (e)ANSI/ASME B56.6-1992 Safety Standard for Rough Terrain Forklift Trucks  
16.7 (f)ANSI/ASME B30.14-1991 Side Boom Tractors  
16.7 (g)CAN/CSA C225-10 Vehicle Mounted Aerial DevicesYes 
16.7 (h)NFPA 1904-1991 Aerial Ladder and Elevating Platform Fire Apparatus  
16.7 (i)ISO 9244:1995 Earth-moving machinery - safety signs and hazard pictorials - General principles  
16.7 (j)CSA B335-1994 Industrial Lift Truck Operator TrainingYes 
16.9 (2)SAE J1029-1986 Lighting and Marking of Construction and Industrial Machinery  
16.11 (1)ANSI Z26.1-1990 Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Code  
16.11 (2)ANSI Z26.1-1990 Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Code  
16.13 (1)(a)SAE J1473-1990 Brake Performance - Rubber-Tired Earthmoving Machines  
16.13 (1)(b)SAE J1026-1990 Braking Performance - Crawler Tractors and Crawler Loaders  
16.13 (1)(c)SAE J1178 ISO11169-1994 Machinery for Forestry - Wheeled Special Machines - Vocabulary, Performance Test Methods, and Criteria for Brake Systems  
16.13 (1)(d)SAE J1472-1987 Braking Performance - Roller Compactors  
16.13 (1)(e)ANSI/ASME B56.1-1993 Safety Standard for Low Lift and High Lift Trucks  
16.13 (1)(f)ANSI/ASME B56.6-1992 Safety Standard for Rough Terrain Forklift Trucks  
16.13 (1)(g)SAE J/ISO 11512-1996 Machinery for Forestry - Tracked Special Machines - Performance Criteria for Brake Systems  
16.13 (3)SAE J1178 ISO11169-1994 Machinery for Forestry - Wheeled Special Machines - Vocabulary, Performance Test Methods, and Criteria for Brake Systems  
16.14 (2)SAE J1511 ISO5010-1994 For Off-Road, Rubber-Tired Machines  
16.17 (1)(f)ISO 2867:1994 Earth-Moving Machinery - Access Systems  
16.21 (2)(a)WCB G601 Log Loader and Log Yarder  
16.21 (2)(b)WCB G602 Log Loader and Log Yarder Raised Cabs  
16.21 (2)(c)WCB G603 Log Loader and Log Yarder Window Guards  
16.21 (2)(d)WCB G604 Light-Duty Screen Guards For Off-Highway Equipment  
16.21 (2)(e)WCB G605 Mobile Equipment Half-Doors  
16.21 (2)(f)WCB G607 Medium Duty Screen Guard (Front End Log Loader)  
16.21 (2)(g)WCB G608 Mobile Equipment Roof Structures - Heavy Duty  
16.21 (2)(h)WCB G609 G609 Mobile Equipment Roof Structures - Light Duty  
16.21 (2)(i)SAE J231-1981 Minimum Performance Criteria for Falling Object Protective Structure (FOPS)  
16.21 (2)(j)SAE J1043-1987 Performance Criteria for Falling Object Protective Structure (FOPS) for Industrial Machines  
16.21 (2)(k)ISO 3449:1992 Earth-Moving Machinery -- Falling-Object Protective Structures -- Laboratory Tests and Performance Requirements  
16.21 (2)(l)SAE J1084-1980 Operator Protective Structure Performance Criteria for Certain Forestry Equipment  
16.21 (2)(m)SAE J1356-1988 Performance Criteria for Falling Object Guards for Excavators  
16.23 (a)CSA B352.0-1995 Rollover Protective Structures (ROPS) for Agricultural, Construction, Earthmoving, Forestry, Industrial, and Mining Machines -- Part 1: General RequirementsNo 
16.23 (a)(i)CSA B352.1-1995 Rollover Protective Structures (ROPS) for Agricultural, Construction, Earthmoving, Forestry, Industrial, and Mining Machines -- Part 2: Testing Requirements for ROPS on Agricultural TractorsYes 
16.23 (a)(ii)CSA B352.2-1995 Rollover Protective Structures (ROPS) for Agricultural, Construction, Earthmoving, Forestry, Industrial, and Mining Machines -- Part 3: Testing Requirements for ROPS on Construction, Earthmoving, Forestry, Industrial, and Mining MachinesYes 
16.23 (b)SAE J1040-1994 Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry, and Mining Machines  
16.23 (c)ISO 3471:1994 Earth-moving Machinery -- Rollover Protective Structures -- Laboratory Tests and Performance Requirements  
16.31 (0.1)BCMOT 1999 Traffic Control Manual for Work on Roadways  
16.32 (1)SAE J386-1993 Operator Restraint System for Off-Road Work Machines  
18.3 BCMOT Traffic Control Manual for Work on Roadways Latest
18.9 (b)(ii)CSA Standard Z96-02 High-Visibility Safety Apparel  
19.8 (1)(a)CSA C22.2 No. 160-1985 Voltage and Polarity TestersYes 
19.8 (1)(b)CSA C22.2 No. 231 Series-M89, CSA Safety Requirements for Electrical and Electronic Measuring and Test EquipmentYes 
19.9 (2)(a)CAN/CSA C225-10 Vehicle Mounted Aerial DevicesYes 
20.17 (1)CSA S269.1-1975 Falsework for Construction PurposesYes 
20.17 (1)CAN/CSA-S269.3-M92, Concrete Formwork Yes 
20.26.3 (1)CSA Z151-2009 Concrete pumps and placing boomsNo 
20.26.3 (2)CSA Z151-2009 Concrete pumps and placing boomsNo 
20.28 (1)CSA Z151-2009 Concrete pumps and placing boomsNo 
20.47 (2)(a)CSA Z151-2009 Concrete pumps and placing boomsNo 
20.47 (2)(b)CSA Z151-2009 Concrete pumps and placing boomsNo 
20.56 (5)(b)1990 Supplement to the National Building Code of Canada  
20.56 (5)(b) BC Building Code  
20.82 (2)NLGA Standard Grading Rules for Canadian Lumber  
20.123CSA Standard CAN/CSA Z275.3-M86 Occupational Safety Code for Construction Work in Compressed Air  
21.61 (1)IME 20-1988 Safety Guide for the Prevention of Radio Frequency Radiation Hazards in the Use of Commercial Electric Detonators (Blasting Caps) As amended
22.28 (1)(a)CAN/CSA B139-1991 Installation Code for Oil Burning EquipmentYes 
22.28 (1)(b)CAN/CGA B149.1-1991 Natural Gas Installation Code  
22.28 (1)(c)CAN/CGA B149.2-1991 Propane Installation Code  
22.28 (1)(d)CSA C22.1-1994 Canadian Electrical Code, Part 1Yes 
22.28 (1)(e)CSA B51-1991 Boiler, Pressure Vessel, and Pressure Piping CodeYes 
22.34 CAN/CSA M421-1993 Use of Electricity in MinesYes 
22.76 CAN/CSA M421-1993 Use of Electricity in MinesYes 
22.85 (3)CAN/CGSB 3.16-1988 Mining Diesel Fuel  
22.86 (1)CAN/CSA M424.2-1990 Non-Rail-Bound Diesel-Powered Machines for Use in Non-Gassy Underground MinesYes 
22.87 (1)CAN/CSA M424.2-1990 Non-Rail-Bound Diesel-Powered Machines for Use in Non-Gassy Underground MinesYes 
22.159 (1)CAN/CSA M423-1987 Fire Resistant Hydraulic FluidsYes 
22.160 (2)(b)CAN/CSA M421-1993 Use of Electricity in MinesYes 
22.160 (2)(c)CAN/CSA M424.1-1988 Flameproof Non-Rail-Bound Diesel-Powered Machines for Use in Gassy Underground Coal MinesYes 
23.10 (4)NFPA 10-1990 Portable Fire Extinguishers  
23.12 (1)(c)(i)CSA Z662-1994 Oil and Gas Pipeline SystemsYes 
23.12 (1)(c)(ii)API RP 520 PT I-1990 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries, Part I - Sizing and Selection  
23.12 (1)(c)(ii)API RP 520 PT II-1988 Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries, II - Installation (November 1988, 3rd Edition)  
23.12 (1)(c)(iii)API RP 521-1990 Guide for Pressure-relieving and Depressuring Systems  
23.12 (1)(c)(iv)ASME B31.3-1993 Chemical Plant and Petroleum Refinery Piping  
23.32 (1)(a)CAODC RP 1.0-1994 Drilling Rigs, Mast Inspection and Certification  
23.32 (1)(b)CAODC RP 2.0-1994 Drilling Rigs, Overhead Equipment Inspection and Certification  
23.32 (1)(c)CAODC RP 3.0-1994 Service Rigs, Inspection and Certification of Masts  
23.32 (1)(d)CAODC RP 4.0-1994 Service Rigs, Overhead Equipment Inspection and Certification  
23.32 (1)(e)CAODC RP 1.0A-1995 Addendum for Drilling Rigs, Substructure Inspection and Certification  
23.88 (1)CAN/CSA B339-1988 Cylinders, Spheres, and Tubes for the Transportation of Dangerous GoodsYes 
23.88 (2)CAN/CSA B340-1988 Selection and Use of Cylinders, Spheres, Tubes, and Other Containers for the Transportation of Dangerous Goods, Class 2Yes 
24.13 (1)(a)CSA Z275.4-1997 Competency Standard for Diving OperationsYes 
24.26 (1)CAN/CSA Z275.2-1992 Occupational Safety Code for Diving OperationsYes 
24.52 CSA Z275.1-1993 Hyperbaric FacilitiesYes 
24.91 NFPA 302-1989 Fire Protection Standard for Pleasure and Commercial Motor Craft  
26.63 (2)API RP 4G-1992 Maintenance and Use of Drilling and Well Servicing Structures  
26.64 (1)ARP 4.1-1993 Drill Stem Testing  
26.86 (1)(d)WCB G606 Boom Boat Operator Protective Structures  
28.26 (a)CAN/CSA Z11-1981 Portable LaddersYes 
28.28 ANSI A14.3-1992 Requirements for Fixed Ladders  
30.4 (1)ANSI/ASSE 1001-1990 Pipe Applied Atmospheric Type Vacuum Breakers  
30.8 (1)ACGIH Industrial Ventilation, A Manual of Recommended Practice As amended
30.8 (2.4)ANSI/ASHRAE 110-1995 Method of Testing Performance of Laboratory Fume Hoods  
30.10 (1)(a)ANSI/AIHA Z9.5-2003 Laboratory Ventilation  
30.12 (3)NSF 49-2002 Class II (Laminar Flow) Biohazard Cabinetry  
30.12 (6)PHAC 2004 Laboratory Biosafety Guidelines  
30.13 (3)CSA C22.2 No. 151-1986 Laboratory EquipmentYes 
30.26 (5)PHAC 2004 Laboratory Biosafety Guidelines  
31.13 (2)NFPA 1972-1992 Helmets for Structural Firefighting: Structural Fire Fighters Helmets  
31.14 (a)NFPA 1971-1991 Protective Clothing for Structural Fire Fighting  
31.14 (b)CAN/CGSB 155.1-1988 Firefighters' Protective Clothing for Protection Against Heat and Flame  
31.16 NFPA 1973-1988 Gloves for Structural Fire Fighting  
31.17 (1)CSA Z259.1-1995 Safety Belts and LanyardsYes 
31.17 (3)NFPA 1983-1990 Fire Service Life Safety Rope, Harness and Hardware  
31.18 (2)NFPA 1982-1993 Personal Alert Safety Systems (PASS) for Fire Fighters  
31.21 CAN/CSA Z94.4-2002 Selection, Use, and Care of RespiratorsYes 
31.22 (2)CAN/CSA Z94.4-2002 Selection, Use, and Care of RespiratorsYes 
31.24 (1)CAN/CSA Z180.1-2000 Compressed Breathing Air and SystemsYes 
31.26 (2)CAN/CSA Z94.4-2002 Selection, Use, and Care of RespiratorsYes 
31.26 (3)CAN/CSA B339-1996 Cylinders, Spheres, and Tubes for the Transportation of Dangerous GoodsYes 
31.26 (4)CAN/CSA Z94.4-2002 Selection, Use, and Care of RespiratorsYes 
31.29 (2)NFPA 1901-1991 Automotive Fire Apparatus  
31.33 NFPA 1904-1991 Aerial Ladder and Elevating Platform Fire Apparatus  
31.34 (2)NFPA 1914-1991 Testing Fire Department Aerial Devices  
31.37 (1)NFPA 1931-1989 Design of and Design Verification Tests for Fire Department Ground Ladders  
31.37 (2)NFPA 1932-1989 Use, Maintenance, and Service Testing of Fire Department Ground Ladders  
31.38 CSA C22.1-1994 Canadian Electrical Code Part 1Yes 


You can return to the Top of this page